Remote control fence arm parking barrier gate

Main functions
 Push-to-automatic learning feature and automatically adapt to different motor and load.
 Vehicle detector selectable, so the function of "arm down when car passed”, “anti damage to cars” and "release for car team" can be set.
 Control handles with "manual / automatic" options.
 Wireless remote control can be used for long-distance and flexible control.
 Anti-stress device such as Infrared or radio waves can be used in this equipment, to reduce the incident of car damage.
 Optional RS485 or RS232 serial communications interface, simple and reliable communication protocols for easy control on the remote control with state feedback.
 Provide various modes of operation and operating parameters through the code switch settings, be able to satisfy users of different functions.
 High-speed Barrier unique features:
 Obstacle automatic detection: during lowing, arm will rise up again when detected the obstacle; while during rising, the arm will stop and unlock when detected obstacle to prevent any incident. The obstacle detection sensitivity has four degrees which is set through code switch.
 automatically unlock when no power: when gates power on and work properly, if arm is horizontal or vertical, gates will lock arm to ensure no damage or incident; when gate power off, the arm will be automatically unlock for the movements by hands. Arm has an anti-collision mechanism which can maximally reduce the damage from vehicle collision to the gates.

Electrical characteristics
 system integration, powerful;
 anti-jamming software and hardware watchdog ensure that no Death of single chip;
 use photoelectric sensors for place detection, non-contact work, and never migration;
 heavy and weak current completely separated, motor control using photocoupling, zero-turn-on technology, so that the control board work with high reliability and no interference;
 input and output signals of electrical isolation to ensure system reliability;
 advanced motor with thermal protection, when temperature is higher than 145 degrees, the power is automatically cut off, motor will not be burnt easily;
 Motor high reliability, long life, running a small vibration, low noise, stable speed, an instant start, back and stop;
 use rising and lowing overtime protection, to ensure that no arms run-off;

Mechanical features
 Use precise sine bar linkage to make sure the gate for ease open, slow stop and no stopping impact movement.
 chassis use steel plate with special arts, surface with high-level automotive paint or powder coating which is corrosion and beautiful, also can avoid fading caused by ultraviolet radiation;
 chassis using waterproof, moisture-proof, dust-proof design;
 arm adapt special aluminum material can be posted the two-color reflective film outside to make it clearly visible at night;
 For use in different occasions (e.g. in a highly limited space underground car parks), we can manufacture arms according customers’ requirements.
 Arm can be installed on any chassis left or right side of the (default is on right side).

Use condition
Please follow the conditions:
 Temperature: TAB series of high-speed -30 ℃ ~ +70 ℃
 Relative Humidity: 20% to 95%
 Reliable speed reducing equipment should be installed in car coming direction to make cars slow down in case of accident.
 When connected with vehicle detectors, infrared, pressure wave and other auxiliary devices, these devices should ensure the reliability and stability.
 Constraints are in the purchase contract.